Ichiro Rose Gold Sword Master Set

Features

HANDLE DESIGN Ergonomic Offset Handle

STEEL Premium 440C Steel

HARDNESS 58-60 HRC (Read More)

SET INCLUDES 2 Cutting Scissors + 1 Thinning Scissors

CUTTING SIZES Choose Any 2: 5.0”, 5.5”, 6.0”, 6.5”

THINNING SIZE 6.0” with 30 Teeth

BLADE DESIGN Lightweight Sword Profile (5.5”, 6.0”, 6.5”) Standard Blade (5.0”)

COATING Rose-Gold Titanium PVD

TENSION SYSTEM Spring Tension - Key Adjustable

INCLUDES

Description

The Ichiro Rose Gold Sword Master Set is a three-piece kit: two cutting scissors in your choice of sizes plus a 6.0” 30-tooth thinner, all finished in rose-gold titanium PVD over 440C stainless. The cutters use a sword-profile blade — a ridged spine that stiffens the blade for a clean, defined line in slide and point work — across the 5.5”, 6.0” and 6.5”; the 5.0” comes on a standard blade. Two cutters lets you keep one for wet and one for dry, or run two lengths for different techniques without switching mid-cut.

The 6.0” thinner runs 30 teeth, which places it in the mid-range, versatile band: enough teeth for controlled, seamless blending and softening hard lines, rather than the coarse, low-tooth geometry you’d pick to strip heavy bulk fast. It’s a finisher and all-rounder, not a dedicated debulker. All three blades are 440C at 58-60HRC — dependable, maintainable steel — and the rose-gold PVD is a genuine professional finish that resists scratches and corrosion better than a bare blade.

• Two sword-profile cutters (5.5”-6.5”; 5.0” standard blade): ridged spine for a clean line in slide and point work

• 6.0” 30-tooth thinner: mid-range tooth count for seamless blending and softening, not heavy debulking

• 440C at 58-60HRC across all three: consistent, maintainable steel; honed sooner than cobalt on coarse hair

• Rose-gold titanium PVD: a real professional finish that wears better than a bare blade

• One matched kit: sword cutter pair plus thinner, cheaper than buying the three separately

• Build Your Master Set

Choose ANY TWO Cutting Sizes:

5.0”: Precision detail specialist (Standard Blade)

5.5”: Versatile technique master (Sword Blade)

6.0”: All-around professional favourite (Sword Blade)

6.5”: Efficiency powerhouse (Sword Blade)

Plus Thinning Scissors: 6.0” with 30 teeth

Popular combinations: 5.5” + 6.5” for maximum range, or 5.5” + 6.0” for versatility

Professional Opinion

“The way I’d build this is around the cutter pairing: a 5.5” sword for detail and close work, a 6.5” sword for long layers, with the 30-tooth thinner doing the blending between them. The sword profile is the draw here — that ridged spine gives the cutters a defined line I trust for slide work. The thinner’s 30 teeth are the sensible all-round choice: it blends and softens cleanly, but it’s a finisher, so if you routinely strip heavy bulk from thick hair you’ll want a coarser blade alongside it down the track. Honest note on all three blades — 440C at 58-60HRC is dependable, maintainable steel rather than a long-interval cobalt edge, so keep a regular honing habit on coarse-hair weeks. As a matched line-and-blend set, it’s a tidy, cohesive kit and the finish holds up to daily use.”