Juntetsu Cobalt Apex Hairdressing Scissor Set

Features

SET INCLUDES Cobalt Apex Cutting Scissors + Cobalt Texturising Scissors 

STEEL TYPE Premium Takefu VG-10 Cobalt Steel (Read More)

CRAFTSMANSHIP Handmade in Tokyo by Master Craftsmen (Since 1925)

QUALITY RATING ★★★★★★ Professional Series

CUTTING SCISSORS Apex Power Precision Blade – Superior Tip Strength for Detail Work

TEXTURISING SCISSORS Choose Your Cut Ratio: Finesse (15%), Blend (20%), or Sculptor (30%)

SIZE OPTIONS 5.5”, 6.0”, 6.5” – Same Size for Both Scissors

HANDLE DESIGN Ergonomic Offset with Removable Finger Rest System

TENSION SYSTEM Precision Click Adjustment with Ball Bearing

EDGE ANGLE 45° Convex Edge with Enhanced Tip Power

LUXURY CASE Premium Leather Case with Individual Compartments for Both Scissors

INCLUDES

NEW JAPAN STOCK AVAILABLE

Limited stock from Japan available. Each set handcrafted in Tokyo by master artisans — quality that lasts a lifetime.

匠  Limited Japan Stock Available!

Description

The Cobalt Apex set pairs a tip-reinforced cutting scissor with a 30-tooth VG-10 cobalt texturiser, both built to the same size and offset so the pair feels like one tool in the hand. For a thinning-led buyer the decision that matters is the texturiser’s cut ratio: all three options share the same 30-tooth blade, and the ratio sets how much each pass removes — Finesse (15%) for near-invisible finishing on fine hair, Blend (20%) as the everyday all-rounder, and Sculptor (30%) for taking more weight out of thick heads. The Takefu cobalt steel holds its tooth edge through heavy weeks, and the ball-bearing click tension keeps each tooth biting consistently across a long day. Right-handed offset build.

• The Ultimate Precision Set

A matched set built in Tokyo: a detail-focused cutting scissor paired with a texturiser you choose by cut ratio. Both scissors share the same VG-10 cobalt steel, the same offset handle and the same size, so moving from shaping to texturising feels like the same tool in your hand. You buy the set once and tune the thinning to your clientele.

• Two tools, one feel: A cutting scissor and a texturiser with identical handle, balance and tension for seamless transitions.

• Matched at purchase: Pick the texturiser’s cut ratio so the thinning suits the hair you actually work on.

• VG-10 cobalt steel: Takefu cobalt stainless with strong edge holding on both the cutter and the tooth blade.

• Reinforced tip on the cutter: Added tip strength for point cutting and tight detail work.

• Same size for both: Choose 5.5”, 6.0” or 6.5” once and it applies to the pair.

• Hand-finished in Tokyo.

• Cobalt Apex Cutting Scissors

The cutter is the detail blade of the set. Its YL blade geometry adds strength at the tip, which is where point cutting and fine section work put the most demand on a scissor. The reinforced tip lets you cut into thick or resistant hair without the blade pushing the hair away, so lines stay clean and detail work stays exact.

Size Options:

• 5.5”: Suited to fine detail work and smaller hands.

• 6.0”: The most popular size, balancing control and reach.

• 6.5”: Suited to longer strokes and thicker hair.

• Cobalt Texturising Scissors

All three texturisers are the same 30-tooth VG-10 blade; what changes is how much each pass takes. Choose the cut ratio that matches your work:

Finesse (15% Cut Ratio): The lightest take, for near-invisible finishing on fine hair where a stray line would show. Removes a little weight without dropping volume or disturbing the shape.

Blend (20% Cut Ratio): The everyday all-rounder, balancing weight removal against volume retention. The sensible default for general texturising.

Sculptor (30% Cut Ratio): The heaviest take, for de-bulking thick, resistant hair faster while holding the shape. At a higher ratio it blends a little less invisibly than the Finesse, which is the trade for the extra removal.

• Professional-Grade Features

Matched ergonomics

Both scissors share the same offset handle, balance and removable finger rest, so the feel stays constant when you swap between cutting and texturising. The offset keeps the wrist neutral through long detail sessions.

Ball-bearing click tension

A ball-bearing tension system with click adjustment lets you set the feel in measurable steps and holds it without drifting through the day — which keeps each tooth biting consistently.

Balanced by hand

Each pair is balanced for weight distribution at the workshop, which steadies the movement and eases wrist load over extended work.

Professional Opinion

“The reason to buy the Apex set is that you match the texturiser to your work at purchase. The cutter is the detail blade — reinforced at the tip, so point cutting and tight section work bite cleanly — but for a thinning-focused buyer the real decision is the cut ratio on the texturiser. All three options are the same 30-tooth VG-10 blade; what changes is how much each pass takes. I’d point most stylists at the Blend (20%) as the everyday all-rounder, the Finesse (15%) if your work is fine hair and invisible finishing where a stray line shows, and the Sculptor (30%) for de-bulking thick heads faster — accepting the heavier take blends a little less invisibly. Because both tools share the same size, weight and offset, swapping from shaping to texturising is seamless, and the cobalt holds its tooth edges through heavy weeks. The honest caveats: at 30 teeth even the Sculptor finishes and blends more than it strips dense bulk in a hurry, and this is a premium matched set, so you’re paying for the cobalt and the pairing rather than a budget kit. Choose the ratio for your clientele and it’s an excellent long-term investment.”