Yasaka Hairdressing Scissors 3PC Master Set

Features

HANDLE POSITION Offset

STEEL ATS314 Cobalt Japan Steel

SIZE 5.5” Cutting, 6.0” Cutting And 6” Inches Thinning Scissors

TEETH 16, 20, 30, or 40 Teeth

BLADE Clam Shaped Convex Edge

FINISH Polished

MODEL Cutting : SM-550, M600 Thinning : YS-160, YS-200, YS-300, YS-400

EXTRAS

Description

The Yasaka 3PC Master Set is a fixed-length kit: a 5.5” and a 6.0” cutter plus a 6” thinner whose tooth count you choose. All three are ATS-314 cobalt steel with a clam-shaped convex edge. On a thinning bench the tooth-count choice is the one that matters, because it sets how the thinner behaves.

• ATS-314 cobalt steel: A hard, fine-grained alloy across all three shears that holds a keen edge.
• Two cutters (5.5” and 6.0”): A detail length and an all-round length, both on a clam-shaped convex slice edge.
• 6” thinner, your tooth count: Pick the cut rate to your work —
  • YS-160 (16 teeth): about 30-40% removed — coarse texture and heavy weight reduction.
  • YS-200 (20 teeth): about 30-40% removed — a balanced all-round texturiser.
  • YS-300 (30 teeth): about 20-35% removed — softer, more invisible blending.
  • YS-400 (40 teeth): about 40-50% across many fine teeth — fine diffusion for melting clipper work.
• Offset handles: Natural thumb position that keeps the wrist neutral.
• Polished finish; handmade in Japan. If you mostly debulk, take the 16T or 20T; if you mostly finish, take the 30T or 40T.

Professional Opinion

“This fixed-length set gives you a 5.5” and a 6.0” cutter plus a thinner you spec yourself, and the thinner is where the decision sits. Pick the tooth count to your clientele: the 16T and 20T take coarse bites for genuine weight removal on thick hair, while the 30T and 40T spread the cut across more teeth for softer, more invisible blending — so choose first whether you mostly debulk or mostly finish. Both cutters run a clam-shaped convex edge that slices cleanly, and the ATS-314 cobalt holds its edge through a busy day better than a 440C blade would. The honest limits are that it is right-handed only and that the two cutting lengths are fixed rather than chosen, so if you want a specific pairing the Master configuration suits better. Buy it for the cobalt steel and the matched cutter-plus-thinner value, and match the teeth to the hair you cut most.”

**Official pages : **

• SM-550
• M-600
• YS-160
• YS-200
• YS-300
• YS-400